Great Benefits of Hiring Asphalt Contractors and Driveway Services
Through either asphalt or concrete, the majority of commercial and residential driveways are finished. Asphalt comes with more benefits through both are cost-effective.
You are probably wondering about the relative benefits of asphalt over concrete if you are paving a new driveway or refinishing an existing one through asphalt contractors and driveway services.
Fast usability and installation speed is offered by asphalt
Depending on the size of the project, an asphalt driveway can usually be laid in one or two days. To lay and even longer to set, concrete on the other hand typically takes twice as long to lay.
Asphalt driveways can be ready for use in as little as two days after completion whereas concrete can take up to a week to cure depending on the season.
Driveway durability is offered by asphalt
You can repair these easily and inexpensively if your asphalt driveway does start to show some lineal cracking. As asphalt contractors & driveway services do not cost very much and can easily be applied on your own, the crack sealant products you need are widely available through home improvement retailers.
Regular preventative maintenance like crack filling, seal coating, sweeping and general upkeep, can extend the lifespan of your asphalt driveway to 20 years or more, in addition. As it cannot be heated and repaired with the same ease as asphalt pavement, concrete is more difficult to maintain.
Additional benefits offered by asphalt pavement
Its black color helps draw and retain more of the sun’s heat which is an additional benefit of asphalt. This means that snow will melt faster on an asphalt driveway than it will on a concrete driveway in the winter.
This makes property maintenance easier for everyone not only does improve safety in residential settings and at commercial business properties.
It is easy to request a free estimate with asphalt paving
All you need to do is contact asphalt contractors and driveway services if you have any questions about the benefits of asphalt paving. All your paving needs will be fulfilled by them.
Before laying asphalt, why is it better to remove a concrete driveway?
When it comes to the question whether or not should you lay new asphalt over the concrete driveway or not it is always recommended that to lay asphalt over the concrete as it is a better overall option for faster installation and much better resistance to weather.
This presents a new challenge if there is an existing concrete driveway. The asphalt driveway contractors will help you lay asphalt driveways over concrete if that is what you want. Since heavy equipment is required to dig up an existing concrete slab, it is also a cheaper option.
There is a significant downside to this nevertheless. For several reasons we recommend removing the existing concrete first:
1) Right driveway sub base building
The initial preparation of the site is the big problem with laying asphalt driveways over concrete. If you are concerned about the strength and stability, the solution is to simply lay a thicker slab with concrete.
Contractors laying concrete rarely worry too much about preparing the base because of this. There is really no way of knowing what is down there until it is dug up because the ground underneath a concrete driveway may be prone to shifting or sinking.
2) The longevity of the driveway
The resulting asphalt pour is going to be prone to instability when asphalt driveways are poured over concrete which rests on an unstable base.
Costly ongoing repair jobs should be done with the expansion joints in the concrete which will quickly turn into cracks in the asphalt. Shifts in the ground could crack the entire surface just as a house’s foundation may crack if improperly laid in extreme cases.
When they are built from the ground up, asphalt driveways last longer and look better. Saving money in the long run, your new asphalt driveway will have a proper, stable base, and therefore will require less maintenance as time goes on.
With a history that stretches back to our earlier times with the advances in asphalt paving continues to march on, even though asphalt is one of the oldest surfacing technologies in the world. To lay as well as finding new ways to make it safer for people and the environment we keep finding new ways to make asphalt quicker and easier to lay.
The foundation of most modern asphalt work with specialized techniques and equipment involved the asphalt processes based around the reclamation and recycling is based on this and this is what is undertaken by the asphalt driveway paving contractors.
1) Asphalt Milling
Since both fundamentally involve pulling up and crushing existing pavement, asphalt milling us easy to confuse with pulverizing. Aimed at removing the top layer of asphalt from a street, parking lot, or driveway without disturbing the sub-base, milling is a recycling and re-paving procedure.
Trailing a drumhead covered in spikes which digs into the asphalt, rips it up, and captures it with a large machine called cold planer. The reclaimed asphalt is taken back to the plant to be mixed in with new paving after a series of conveyor belt carries the milled asphalt to the waiting trucks.
2) Asphalt Pulverizing
In the process, a huge machine drives along the roadway, ripping up existing asphalt as pulverizing is similar to milling. Pulverizing is the first stage in reusing asphalt to re-pave the same area, unlike milling.
3) Asphalt Stabilization
Through pulverizing, stabilization is the second part of the process begun. A mixture of tar and other waterproofing and binding agents is overlaid so that the binding fluid thoroughly mixes in with the crushed asphalt once it is left behind.
The result is a rebuilt asphalt road or driveway which is made using a minimum of new material but every bit is as strong and reliable as when the road is laid in the first place after a day or so which is required for it to harden.
It is possible to quickly replace asphalt with a minimum of cost, effort, and traffic disruption between pulverizing and stabilization.